448024679_10646... jpg
(282.25 KB, 1080x1346)

448094234_81262... jpg
(287.39 KB, 1080x1346)

An8yhPKtZN... mp4
(1.22 MB, 1080x1920 h264)

 >>/55430/
I agree. I have an old bolt action that had a cutout for stripper clips, but the cutout is just a rectangular cut, and it was slightly too narrow for the clips that I would use (1903 springfield ones) and because of the cut there isn't enough material there to cut out a proper clip guide. 
Damned PoS. Eventually I will weld something in there so clips fit well.